xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
767
Example
To display the current OSPF virtual interface configuration:
DGS-3620-28SC:admin#show ospf virtual_link
Command: show ospf virtual_link
Virtual Interface Configuration
Transit Virtual Hello Dead Authentication Link
Area ID Neighbor Router Interval Interval Status
--------------- --------------- -------- -------- -------------- ------
4.4.4.4 1.1.1.1 10 60 MD5 Up
4.4.4.4 6.6.6.6 10 250 Simple Down
Total Entries : 2
DGS-3620-28SC:admin#
69-19
enable ospf
Description
This command is used to enable OSPF on the switch.
Format
enable ospf
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable OSPF on the switch:
DGS-3620-28SC:admin# enable ospf
Command: enable ospf
Success.
DGS-3620-28SC:admin#
69-20
show ospf
Description
This command is used to display the current OSPF settings on the switch.
Содержание xStack DGS-3620-52P
Страница 1: ...xStack DGS 3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide I...
Страница 142: ...xStack DGS 3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 137 DGS 3620 28SC admin...
Страница 436: ...xStack DGS 3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 431 DGS 3620 28SC admin...
Страница 635: ...xStack DGS 3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 630 Success DGS 3620 28SC admin...