D-Link xStack DGS-3620-52P, Руководство пользователя

Страница: 179 / 1170

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
174
Format
config bgp neighbor map [<ipaddr> | peer_group <peer_group_name 16>]
{unsuppress_map [add | delete] <map_name 16> | route_map [in | out] [add | delete]
<map_name 16>}(1)
Parameters
<ipaddr> - Specifies the IP address of the neighbor to be configured.
peer_group - Specifies the peer group to be configured.
<peer_group_name 16> - Enter the peer group name here. This name can be up to 16
characters long.
unsuppress_map - (Optional) Name of a route map used to selectively advertise routers
previously suppressed by the aggregate_address command.
add - Specifies that a route map will be added.
delete - Specifies that a route map will be deleted.
<map_name 16> - Enter the unsurpress map name here. This name can be up to 16
characters long.
route_map - (Optional) Specify the route map to be applied to the incoming or outgoing routes.
in - Specifies the incoming routes from the neighbor.
out - Specifies the outgoing routes sent to the peer.
add - Specifies that a route map will be added.
delete - Specifies that a route map will be deleted.
<map_name 16> - Enter the unsurpress map name here. This name can be up to 16
characters long.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
This example shows how to configure the unsuppr
ess map of peer group “Campus” to Profile1:
DGS-3620-28SC:admin# config bgp neighbor map peer_group Campus unsuppress_map
add Profile1
Command: config bgp neighbor map peer_group Campus unsuppress_map add Profile1
Success.
DGS-3620-28SC:admin#
12-28 config bgp neighbor filter
Description
The command is used to configure the filter related setting for a BGP neighbor.
filter_list:
If the filter_list doesn’t exist or does exist but have no filter entry, it means deny any.
prefix_list:
If the prefix_list doesn’t exist, it means deny any. If the prefix_list does exist but have
no filter entry defined, it will permit all.
capability_orf_prefix_list: BGP Outbound Route Filter Capability allows one BGP router to install
its configured inbound prefix_list filter on to the remote BGP router. This is used for reducing the