D-Link xStack DGS-3620-52P, Руководство пользователя

Страница: 1143 / 1170

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1138
Parameters description:
string : Username
ipaddr : IP address
macaddr : MAC address
unitID : The unit ID
portNum : The port number
Event description: When a client host fails to authenticate.
Log Message: JWAC unauthenticated user (User Name: <string>,
IP: <ipaddr>, MAC: <macaddr>, Port: <[unitID:]portNum>)
Parameters description:
string : User name
ipaddr : IP address
macaddr : MAC address
unitID : The unit ID
portNum : The port number
Warning
Event description: This log will be triggered when the number of
authorized users reaches the maximum user limit on the whole
device.
Log Message: JWAC enters stop learning state.
Warning
Event description: This log will be triggered when the number of
authorized users is below the maximum user limit on the whole
device in a time interval (5 min).
Log Message: JWAC recovered from stop learning state.
Warning
LBD
Event Description : Loop back is detected under port-based
mode.
Log Message :
Port < [unitID:] portNum> LBD loop occurred. Port blocked.
Parameters Description:
portNum : The port number.
Critical
Event Description : Port recovered from LBD blocked state under
port-based mode.
Log Message :
Port < [unitID:] portNum>LBD port recovered. Loop detection
restarted
Parameters Description:
portNum : The port number.
Informational
Event Description : Loop back is detected under VLAN-based
mode.
Log Message :
Port < [unitID:] portNum> VID <vlanID> LBD loop occurred. Packet
discard begun
Parameters Description:
portNum : The port number.
Critical