xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
347
Figure 8-31 WAC Port Settings window
The fields that can be configured are described below:
Parameter
Description
From Port / To Port
Use the drop-down menus to select a range of ports to be enabled as WAC ports.
Aging Time (1-1440)
This parameter specifies the time period during which an authenticated host will remain
in the authenticated state. Enter a value between
1
and
1440
minutes. Tick the
Infinite
check box to indicate the authenticated host will never age out on the port. The default
value is
1440
minutes (24 hours).
State
Use this drop-down menu to enable the configured ports as WAC ports.
Idle Time (1-1440)
If there is no traffic during the Idle Time parameter, the host will be moved back to the
unauthenticated state. Enter a value between
1
and
1440
minutes. Tick the
Infinite
check box to indicate the Idle state of the authenticated host on the port will never be
checked. The default value is Infinite.
Block Time (0-300)
This parameter is the period of time a host will be blocked if it fails to pass
authentication. Enter a value between
0
and
300
seconds. The default value is 60
seconds.
Click the
Apply
button to accept the changes made.
WAC Authentication State
Users can view and delete the hosts for Web authentication.
To view this window, click
Security > Web-based Access Control (WAC) > WAC Authentication State
as
shown below:
Содержание xStack DGS-3620-52P
Страница 1: ......
