xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
35
IP address.
Interface Name
Enter the name of the IP interface being configured.
IPv4 Address
Enter the IPv4 address used.
Subnet Mask
Enter the IPv4 subnet mask used.
VLAN Name
Enter the VLAN Name used.
IPv4 State
Use the drop-down menu to enable or disable IPv4 State.
Interface Admin State
Use the drop-down menu to enable or disable the Interface Admin State.
Click the
Apply
button to accept the changes made for each individual section.
Click the
<<Back
button to discard the changes made and return to the previous page.
Click the
IPv6 Edit
button to see the following window.
Figure 3-11 IPv6 Interface Settings window
The fields that can be configured or displayed are described below:
Parameter
Description
Interface Name
Display the IPv6 interface name.
IPv6 State
Use the drop-down menu to enable or disable IPv6 State.
Interface Admin State
Use the drop-down menu to enable or disable the Interface Admin State.
IPv6 Network Address
Enter the neighbor’s global or local link address.
DHCPv6 Client
Use the drop-down menu to enable or disable DHCPv6 client.
NS Retransmit Time
(0-4294967295)
Enter the Neighbor solicitation’s retransmit timer in millisecond here. It has the same
value as the RA retransmit time in the config ipv6 nd ra command. If this field is
configured, it will duplicate the entry into the RA field.
Automatic Link Local
Address
Use the drop-down menu to enable or disable the Automatic Link Local Address.
State
Use the drop-down menu to enable or disable router advertisement.
Life Time (0-9000)
Enter the lifetime of the router between 0 and 9000 seconds as the default router.
Reachable Time (0-
3600000)
Enter the amount of time that a node can consider a neighboring node reachable
after receiving a reachability confirmation, in milliseconds.
Содержание xStack DGS-3620-52P
Страница 1: ......
