manualshive.com logo in svg

D-Link xStack DGS-3620-52P, Справочное руководство

D-Link xStack DGS-3620-52P - высокопроизводительный коммутатор с поддержкой PoE, идеальный для предприятий. Скачайте бесплатно Руководство по эксплуатации с manualshive.com, чтобы получить подробные инструкции по настройке и использованию этого устройства. Не упустите возможность загрузить свой комплект инструкций!

Поделиться
Скачать
background image

xStack

® 

DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide 

211 

 

PIM-SSM 

The Source Specific Multicast (SSM) feature is an extension of IP multicast where datagram traffic is forwarded to 
receivers from only those multicast sources to which the receivers have explicitly joined. For multicast groups in 
SSM range, only source-specific multicast distribution trees (no shared trees) are created. 

The Internet Assigned Numbers Authority (IANA) has reserved the address range from 232.0.0.0 to 
232.255.255.255 for SSM applications and protocols. The Switch allows SSM configuration for an arbitrary subset 
of the IP multicast address range from 224.0.0.0 to 239.255.255.255. 

 

PIM-DM 

The Protocol Independent Multicast - Dense Mode (PIM-DM) protocol should be used in networks with a low delay 
(low latency) and high bandwidth as PIM-DM is optimized to guarantee delivery of multicast packets, not to reduce 
overhead. 

The PIM-DM multicast routing protocol is assumes that all downstream routers want to receive multicast messages 
and relies upon explicit prune messages from downstream routers to remove branches from the multicast delivery 
tree that do not contain multicast group members. 

PIM-DM has no explicit ‘join’ messages. It relies upon periodic flooding of multicast messages to all interfaces and 
then either waiting for a timer to expire (the Join/Prune Interval) or for the downstream routers to transmit explicit 
‘prune’ messages indicating that there are no multicast members on their respective branches. PIM-DM then 
removes these branches (‘prunes’ them) from the multicast delivery tree. 

Because a member of a pruned branch of a multicast delivery tree may want to join a multicast delivery group (at 
some point in the future), the protocol periodically removes the ‘prune’ information from its database and floods 
multicast messages to all interfaces on that branch. The interval for removing ‘prune’ information is the Join/Prune 
Interval. 

PIM-SM-DM 

In the PIM-SM, RP is a key point for the first hop of the sender. If the first hop does not have RP information when 
the sender sends data out, it will drop the packet and do nothing. Sparse-Dense mode will be useful in this 
condition. In Sparse-Dense mode, the packets can be flooded to all the outgoing interfaces and pruning/joining 
(prune/graft) can be used to control the outgoing interface list if RP is not found. In other words, the PIM Sparse-
Dense mode is treated in either the sparse mode or dense mode of the operation; it depends on which mode the 
multicast group operates. When an interface receives multicast traffic, if there is a known RP for the group, then the 
current operation mode on the interface is sparse mode, otherwise the current operation mode on the interface will 
be dense mode. 

 

PIM for IPv4 

 

PIM Global Settings 

This window is used to configure PIM global state and the parameter settings for the PIM distribution tree on the 
Switch. 

To view the following window, click 

L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM 

Global Settings

, as shown below: 

 

 

Figure 5-781 PIM Global Settings window 

 

The fields that can be configured are described below: 

Parameter 

Description 

PIM Global State 

Click the radio buttons to enable or disable PIM global state. 

Содержание xStack DGS-3620-52P


























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для xStack DGS-3620-52P

Gavita RS1 User Manual preview
RS1
Бренд: Gavita Страницы: 12
Jabra LINK 14201-20 - DATASHEET FOR TOSHIBA PHONES How To Connect preview
LINK 14201-20 - DATASHEET FOR TOSHIBA PHONES
Бренд: Jabra Страницы: 4
Cross Technologies 1582-225L2 Instruction Manual preview
1582-225L2
Бренд: Cross Technologies Страницы: 20
FS 108710 Quick Start Manual preview
108710
Бренд: FS Страницы: 23
Balluff NAMUR BES G06MD-GNX10B-EV02-EEX Operating Instructions Manual preview
NAMUR BES G06MD-GNX10B-EV02-EEX
Бренд: Balluff Страницы: 56
Woxcon MUH44A-H2 User Manual preview
MUH44A-H2
Бренд: Woxcon Страницы: 42
Lindy 32586 Quick Start Manual preview
32586
Бренд: Lindy Страницы: 2
Soyntec Nexoos 370 Series User Manual preview
Nexoos 370 Series
Бренд: Soyntec Страницы: 7
Unipoe 16GE+2G SFP User Manual preview
16GE+2G SFP
Бренд: Unipoe Страницы: 41
GarrettCom Magnum CS14 Series Installation And User Manual preview
Magnum CS14 Series
Бренд: GarrettCom Страницы: 76
AbleNet 100DSLAT Quick Start Manual preview
100DSLAT
Бренд: AbleNet Страницы: 6
Radio Systems HUB16-DC Technical Manual preview
HUB16-DC
Бренд: Radio Systems Страницы: 19
3onedata IES2008 Quick Installation Manual preview
IES2008
Бренд: 3onedata Страницы: 2
MTHTrains RealTrax O-3 User Manual preview
RealTrax O-3
Бренд: MTHTrains Страницы: 16
Guntermann & Drunck UCON/s Getting Started preview
UCON/s
Бренд: Guntermann & Drunck Страницы: 8
TRENDnet TI-G102 Quick Installation Manual preview
TI-G102
Бренд: TRENDnet Страницы: 2
Dahua C5-MDS Technical Manual preview
C5-MDS
Бренд: Dahua Страницы: 5
Extron electronics MAV 44 SVA RCA Brochure & Specs preview
MAV 44 SVA RCA
Бренд: Extron electronics Страницы: 5

Бренды по названию

Популярные бренды

Загрузить еще бренды