xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
55
access to devices through a combination of authentication and encrypting packets
over the network.
Security Level
The Security Level settings only apply to SNMPv3.
NoAuthNoPriv
– Specify that there will be no authorization and no encryption of
packets sent between the Switch and a remote SNMP manager.
AuthNoPriv
– Specify that authorization will be required, but there will be no
encryption of packets sent between the Switch and a remote SNMP manager.
AuthPriv
– Specify that authorization will be required, and that packets sent between
the Switch and a remote SNMP manger will be encrypted.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to remove the specific entry.
SNMP Engine ID Settings
The Engine ID is a unique identifier used for SNMP V3 implementations on the Switch.
To view the following window, click
Management > SNMP Settings > SNMP Engine ID Settings
, as show below:
Figure 3-42 SNMP Engine ID Settings window
The fields that can be configured are described below:
Parameter
Description
Engine ID
To change the Engine ID, type the new Engine ID value in the space provided. The SNMP
engine ID displays the identification of the SNMP engine on the Switch. The default value is
suggested in RFC2271. The very first bit is 1, and the first four octets are set to the binary
equivalent of the agent’s SNMP management private enterprise number as assigned by
IANA (D-Link is 171). The fifth octet is 03 to indicate the rest is the MAC address of this
device. The sixth to eleventh octets is the MAC address.
Click the
Apply
button to accept the changes made.
NOTE:
The Engine ID length is 10-64 and accepted characters can range from 0 to F.
SNMP User Table Settings
This window
displays all of the SNMP User’s currently configured on the Switch.
To view the following window, click
Management > SNMP Settings > SNMP User Table Settings
, as show below:
Содержание xStack DGS-3620-52P
Страница 1: ......
