D-Link xStack DGS-3620-52P Скачать руководство пользователя

Страница: 481 / 505

xStack

DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide

471

Log Message:

Stacking topology is <Stack_TP_TYPE>. Master(Unit

<unitID>, MAC:<macaddr>).

Parameters description:

Stack_TP_TYPE:

The stacking topology type is one of the following:

1. Ring,

2. Chain.

unitID:

Box ID.

Macaddr:

MAC address.

Event description:

Backup master changed to master.

Log Message:

Backup master changed to master. Master (Unit: <unitID>).

Parameters description:

unitID:

Box ID.

Informational

Event description:

Slave changed to master

Log Message:

Slave changed to master. Master (Unit: <unitID>).

Parameters description:

unitID:

Box ID.

Informational

Event description:

Box ID conflict.

Log Message:

Hot insert failed, box ID conflict: Unit <unitID> conflict

(MAC: <macaddr> and MAC: <macaddr>).

Parameters description:

unitID:

Box ID.

macaddr:

The MAC addresses of the conflicting boxes.

Critical

SNMP

Event Description:

SNMP request received with invalid community string

Log Message:

SNMP request received from <ipaddr> with invalid

community string.

Parameters Description:

ipaddr:

The IP address.

Informational

OSPFv2

Enhancement
Function

Event description:

OSPF interface link state changed.

Log Message:

OSPF interface <intf-name> changed state to [Up | Down]

Parameters description:

intf-name:

Name of OSPF interface.

Informational

Event description:

OSPF interface administrator state changed.

Log Message:

OSPF protocol on interface <intf-name> changed state to

[Enabled | Disabled]

Parameters description:

intf-name:

Name of OSPF interface.

Informational

Event description:

One OSPF interface changed from one area to

another.

Log Message:

OSPF interface <intf-name> changed from area <area-id>

to area <area-id>

Parameters description:

intf-name:

Name of OSPF interface.

area-id:

OSPF area ID.

Informational

Event description:

One OSPF neighbor state changed from Loading to

Full.

Log Message:

OSPF nbr <nbr-id> on interface <intf-name> changed

state from Loading to Full

Parameters description:

intf-name:

Name of OSPF interface.

nbr-id:

Neighbor's router ID.

notice

Event description:

One OSPF neighbor state changed from Full to

Down.

Log Message:

OSPF nbr <nbr-id> on interface <intf-name> changed

state from Full to Down

notice

Содержание xStack DGS-3620-52P


























































































































































































































































































































































































































































































































Результаты поиска

Содержание xStack DGS-3620-52P

Отзывы:

Похожие инструкции для xStack DGS-3620-52P

Бренды по названию

Популярные бренды

D-Link xStack DGS-3620-52P, Справочное руководство

Результаты поиска

Содержание xStack DGS-3620-52P

Отзывы:

Похожие инструкции для xStack DGS-3620-52P

Бренды по названию

Популярные бренды