D-Link xStack DGS-3620-52P, Справочное руководство

Страница: 190 / 505

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
180
Parameter Description
Network Mask The IP address mask for the advertised destination.
E-bit The type of external metric. If the E-bit is set, the metric specified is a Type 2 external
metric. This means the metric is considered larger than any link state path. If the E-bit
is zero, the specified metric is a Type 1 external metric. This means that is comparable
directly to the link state metric.
Forwarding Address Data traffic for the advertised destination will be forwarded to this address. If the
Forwarding Address is set to 0.0.0.0, data traffic will be forwarded instead to the
advertisement’s originator.
TOS The Type of Service that the following cost is relevant to.
Metric
The cost of this route. The interpretation of this metric depends on the external type
indication (the E - bit above).
External Route Tag A 32-bit field attached to each external route. This is not used by the OSPF protocol
itself.
The NSSA or Not So Stubby Area is a feature that has been added to OSPF so external routes from ASs
(Autonomous Systems) can be imported into the OSPF area. As an extension of stub areas, the NSSA feature
uses a packet translation system used by BRs (Border Routers) to translate outside routes into the OSPF area.
Including the NSSA
Consider the following example:
Figure 5-32 NSSA Area example
The NSSA ASBR (Not So Stubby Area Autonomous System Border Router) is receiving External Route information
and translating it as an LSA Type-7 packet that will be distributed ONLY to switches within the NSSA (Area 2 in the
example above). For this route’s information to enter another area, the LSA Type-7 packet has to be translated into
an LSA Type-5 packet by the NSSA ABR (Area Border Router) and then is distributed to other switches within the
other OSPF areas (Area 1 and 2 in the example above). Once completed, new routes are learned and new
shortest routes will be determined.
To alleviate any problems with OSPF summary routing due to new routes and packets, all NSSA area border
routers (ABR) must support optional importing of LSA type-3 summary packets into the NSSA.
Type-7 LSA Packets