D-Link xStack DGS-3620-52P, Справочное руководство

Страница: 197 / 505

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
187
IP Address Enter the IP address that uniquely identifies the network that corresponds to the OSPF
Area.
Network Mask Enter the network mask that uniquely identifies the network that corresponds to the OSPF
Area.
LSDB Type Use the drop-down menu to select the type of address aggregation. Options to choose
from are
NSSA Ext and Summary .
Advertise Use the drop-down menu to enable or disable the advertisement trigger.
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the selected entry.
Click the Delete button to remove the selected entry.
OSPF Host Router Settings
This window is used to configure OSPF host route settings.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF Host Router Settings , as shown
below:
Figure 5-42 OSPF Host Router Settings window
The fields that can be configured are described below:
Parameter Description
Host Address Enter the host’s IP address used.
Metric Enter a metric between 1 and 65535, which will be advertised.
Area ID Enter a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely
identifies the OSPF area in the OSPF domain.
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the selected entry.
Click the Delete button to remove the selected entry.
OSPF LSDB Table
This window is used to display the OSPF Link State Database (LSDB).
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF LSDB Table , as shown below:
Figure 5-43 OSPF LSDB Table window