D-Link xStack DGS-3600 Series, Руководство CLI

Страница: 96 / 431

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
93
config stp priority
the Switch.
Restrictions Only administrator-level and operator-level users can issue this
command.
Example usage:
To set the priority value for
instance_id
2 as 4096:
DGS-3627:5#config stp priority 4096 instance_id 2
Command : config stp priority 4096 instance_id 2
Success.
DGS-3627:5#
config stp mst_config_id
Purpose Used to update the MSTP configuration identification.
Syntax config stp mst_config_id {revision_level <int 0-65535> | name
<string>}
Description This command will uniquely identify the MSTP configuration currently
configured on the Switch. Information entered here will be attached to
BPDU packets as an identifier for the MSTP region to which it belongs.
Switches having the same
revision_level and name will be considered as
part of the same MSTP region.
Parameters revision_level <int 0-65535> – Enter a number between 0 and 65535 to
identify the MSTP region. This value, along with the name will identify
the MSTP region configured on the Switch. The default setting is
0 .
name <string> - Enter an alphanumeric string of up to 32 characters to
uniquely identify the MSTP region on the Switch. This name , along with
the revision_level value will identify the MSTP region configured on the
Switch. If no name is entered, the default name will be the MAC address
of the device.
Restrictions Only administrator-level and operator-level users can issue this
command.
Example usage:
To configure the MSTP region of the Switch with revision_level 10 and the name “Zira”:
DGS-3627:5#config stp mst_config_id revision_level 10 name ZIra
Command: config stp mst_config_id revision_level 10 name Zira
Success.
DGS-3627:5#
config stp mst_ports
Purpose Used to update the port configuration for a MSTP instance.
Syntax config stp mst_ports <portlist> instance_id <value 0-15>
{internalCost [auto | <value 1-200000000>] priority <value 0-240>}
Description This command will update the port configuration for a STP instance_id . If
a loop occurs, the MSTP function will use the port priority to select an