xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
136
show port dot1v
Purpose
Used to display the bound protocol template on a specific port or ports.
Syntax
show port dot1v {ports <portlist>}
Description
This command will display the protocol VLAN group and VLAN for
individual ports.
Parameters
ports <portlist>
- Enter the port or group of ports for which to display the
protocol VLAN group settings. Entering this command without this
parameter will display all ports and their corresponding protocol VLAN
group settings.
Restrictions None..
Example usage:
To configure the ports for a protocol VLAN group:
DGS-3627:5#show port dot1v ports 6-8
Command: show port dot1v ports 6-8
Port: 6
Protocol Group ID VLAN Name
------------------------- ----------------
1 building1
Port: 7
Protocol Group ID VLAN Name
------------------------- ----------------
1 building1
Port: 8
Protocol Group ID VLAN Name
------------------------- ----------------
1 building1
Total Entries: 3
DGS-3627:5#
