D-Link xStack DGS-3600 Series, Руководство CLI

Страница: 362 / 431

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
359
create wac user
Purpose Used to create a Web-based Access Control user on the switch
Syntax create wac user <username 15> {vlan <vlan_name 32>}
Description This command is used to create a Web-based Access Control user on
the Switch.
Parameters <username 15> -Enter a username of up to 15 alphanumeric characters
used to authenticate users trying to access the network via the Switch.
This username must be identical to the one the user enters to access the
Web-based Access Control for the Switch.
vlan <vlan_name 32> - Enter the VLAN name of the VLAN this user will
be placed in, once authenticated.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create a WAC user on the Switch.
DGS-3627:5#create wac user ctsnow vlan Tiberius
Command: create wac user ctsnow vlan Tiberius
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DGS-3627:5#
delete wac user
Purpose Used to delete a Web-based Access Control user on the switch
Syntax delete wac user <username 15>
Description This command is used to delete a Web-based Access Control user on
the Switch.
Parameters <username 15> -Enter a username of up to 15 alphanumeric characters
used to authenticate users trying to access the network via the Switch.
This username must be identical to the one the user enters to access the
Web-based Access Control for the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete a WAC user on the Switch.
DGS-3627:5#delete wac user ctsnow
Command: delete wac user ctsnow
Success.
DGS-3627:5#
config wac user
Purpose Used to configure a previously created Web-based Access Control