xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
config wac
already been pre-assigned by the administrator using the
config radius
commands located in the 802.1x section.
default_redirpath
- Enter the URL of the website that authenticated
users placed in the VLAN are directed to once authenticated. This path
must be entered into this field before the Web-based Access Control
can be enabled.
Restrictions
The WAC VLAN, ports and method can only be configured separately.
Only administrator-level and operator-level users can issue this
command.
Example usage:
To configure the WAC VLAN:
DGS-3627:5#config wac vlan Balkman
Command: config wac vlan Balkman
Success.
DGS-3627:5#
Example usage:
To configure the WAC ports:
DGS-3627:5#config wac ports 1-7 state enable
Command: config wac ports 1-7 state enable
Success.
DGS-3627:5#
Example usage:
To configure the Web-based Access Control method:
DGS-3628:4#config wac method local
Command: config wac method local
Success.
DGS-3627:5#
NOTE:
To enable the Web-based Access Control
function, the redirection
path field must have the URL of the website that users will be directed to
once they enter the limited resource, pre-configured VLAN. Users which
attempt Apply settings without the Redirection Page field set will be
prompted with an error message and Web-based Access Control
will not
be enabled. The URL should follow the form http(s)://www.dlink.com
NOTE:
The subnet of the IP address of the authentication VLAN must be
the same as that of the client, or the client will always be denied
authentication.
358
