D-Link xStack DGS-3600 Series Скачать руководство пользователя

Страница: 272 / 431

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual

269

DGS-3627:5#create policy_route name manager

Command: create policy_route name manager

Success.

DGS-3627:5#

config policy_route

Purpose

Used to configure the parameters to set the policy route on the Switch.

Syntax

config policy_route name <policyroute_name 32> acl profile_id <value 1-14> |
access_id <value 1-128> | nexthop <ipaddr> | state [enable | disable]

Description

This command is used to configure the policy route settings for a policy route
created with the

create policy_route

command. The administrator must have

previously created an access profile with an accompanying access rule using the

create access_profile profile_id

and

config access_profile profile_id

mentioned previously in this manual. The next hop router IP address must also be
specified using this command.

Parameters

name <policyroute_name 32> -

Enter an alphanumeric name of no more than 32

characters which identifies this policy route.

acl – This parameter is used to denote the access profile that will be used with this
command, by identifying the following parameters:

•

profile_id <value 1-14> -

Enter the ID number of the previously created

access profile that is to be associated with this policy route.

•

access_id

<value 1-128> -

Enter the previously created access ID that

has been created in conjunction with the access profile ID mentioned
previously, that is to be associated with this policy route.

nexthop <ipaddr> -

Enter the IP address of the net hop router that will be

connected to the gateway router. This field must be set or no policy routing will take
place.

state [enable | disable]

– Used to enable or disable this policy route on the Switch.

Restrictions

Only administrator-level and operator-level users can issue this command.

Example usage:

To configure the policy route name “manager”:

DGS-3627:5#config policy_route name manager acl profile_id 1 access_id 2 next
hop 10.2.2.2 state enable

Command: config policy_route name manager acl profile_id 1 access_id 2 next
hop 10.2.2.2 state enable

Success.

DGS-3627:5#

delete policy_route

Purpose

Used to delete a policy route setting.

Syntax

delete policy_route name <policyroute_name 32>

Description

This command is used to delete a policy route setting.

Parameters

name <policyroute_name 32> -

Enter an alphanumeric name of no more than 32

characters to identify this policy route to be deleted.

Restrictions

Only administrator-level and operator-level users can issue this command.

Содержание xStack DGS-3600 Series















































































































































































































































































































































































































































Результаты поиска

Содержание xStack DGS-3600 Series

Отзывы:

Похожие инструкции для xStack DGS-3600 Series

Бренды по названию

Популярные бренды

D-Link xStack DGS-3600 Series, Руководство CLI

Результаты поиска

Содержание xStack DGS-3600 Series

Отзывы:

Похожие инструкции для xStack DGS-3600 Series

Бренды по названию

Популярные бренды