xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
112
config scheduling
Restrictions
Only administrator-level and operator-level users can issue this command.
Example usage:
To configure the traffic scheduling mechanism for each queue:
DGS-3627:5# config scheduling 0 max_packet 12
Command: config scheduling 0 max_packet 12
Success.
DGS-3627:5#
show scheduling
Purpose
Used to display the currently configured traffic scheduling on the Switch.
Syntax
show scheduling
Description The
show scheduling
command will display the current traffic
scheduling mechanisms in use on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the current scheduling configuration:
DGS-3627:5#show scheduling
Command: show scheduling
QOS Output Scheduling
Class ID MAX. Packets
----------- --------------------
Class-0 1
Class-1 2
Class-2 3
Class-3 4
Class-4 5
Class-5 6
Class-6 7
DGS-3627:5#
config 802.1p user_priority
Purpose
Used to map the 802.1p user priority of an incoming packet to one of the
seven hardware queues available on the Switch.
Syntax
config 802.1p user_priority <priority 0-7> <class_id 0-6>
Description
This command allows users to configure the method that the Switch will map
an incoming packet, based on its 802.1p user priority, to one of the seven
available hardware priority queues on the Switch.
The Switch’s default is to map the following incoming 802.1p user priority
values to the eight hardware priority queues:
802.1p Hardware Queue Remark
0 2 Mid-low
1 0 Lowest
