manualshive.com logo in svg

D-Link xStack DGS-3600 Series, Руководство CLI

Серия D-Link xStack DGS-3600 - мощные коммутаторы для сетей предприятия. Получите бесплатный Cli Manual для настройки и управления устройством. Скачайте руководство по эксплуатации с нашего веб-сайта manualshive.com и начните использование сегодня.

Поделиться
Скачать
background image

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual

 

 

23

config ports 

Restrictions

 

Only administrator-level and operator-level users can issue this command. 

Example usage: 

To configure the speed of ports 1 to 3 to be 10 Mbps, full duplex, with learning and state enabled: 

DGS-3627:5#config ports 1-3 speed 10_full learning enable state enable 

Command: config ports 1-3 speed 10_full learning enable state enable 

 

Success. 

 

DGS-3627:5# 

 

show ports 

Purpose

 

Used to display the current configuration of a range of ports. 

Syntax

 

show ports {<portlist>} {[description} | err_disabled]} 

Description

 

This command is used to display the current configuration of a range of ports. 

Parameters

 

<portlist> 

 

−

  Specifies a port or range of ports to be displayed. The beginning 

and end of the port list range are separated by a dash.  

{description} 

– Adding this parameter to the 

show ports

 command indicates 

that a previously entered port description will be included in the display. 

err_disabled

 – Choosing this parameter will display ports that have been 

disconnected due to an error on the port, such as a Loopback Detection. 

Restrictions

 

None. 

Example usage: 

To display the configuration of all ports on a standalone switch: 

DGS-3627:5#show ports 

Command: show ports

 

 

Port        Port                        Settings                            Connection                 Address 
               State           Speed/Duplex/FlowCtrl   Speed/Duplex/FlowCtrl         Learning 
------      -------------    ----------------------------------   ---------------------------------       ---------------- 
1            Enabled     Auto/Enabled                     Link Down                               Enabled 
2            Enabled     Auto/Enabled                     Link Down                               Enabled 
3            Enabled     Auto/Enabled                     Link Down                               Enabled 
4            Enabled     Auto/Enabled                     Link Down                               Enabled 
5            Enabled     Auto/Enabled                     Link Down                               Enabled 
6            Enabled     Auto/Enabled                     Link Down                               Enabled 
7            Enabled     Auto/Enabled                     Link Down                               Enabled 
8            Enabled     Auto/Enabled                     Link Down                               Enabled 
9            Enabled     Auto/Enabled                     Link Down                               Enabled 
10          Enabled     Auto/Enabled                     Link Down                               Enabled 
11          Enabled     Auto/Enabled                     100M/Full/None                      Enabled 
12          Enabled     Auto/Enabled                     Link Down                              Enabled 
13          Enabled     Auto/Enabled                     Link Down                              Enabled 
14          Enabled     Auto/Enabled                     Link Down                              Enabled 
15          Enabled     Auto/Enabled                     Link Down                              Enabled 
16          Enabled     Auto/Enabled                     Link Down                              Enabled 
17          Enabled     Auto/Enabled                     Link Down                              Enabled 
18          Enabled     Auto/Enabled                     Link Down                              Enabled 
19          Enabled     Auto/Enabled                     Link Down                              Enabled 
 

CTRL+C

 

ESC

 

q

 Quit 

SPACE

 

n

 Next Page 

p

 Previous Page 

r

 Refresh 

Содержание xStack DGS-3600 Series
















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для xStack DGS-3600 Series

Dahua D-PFS4226-24ET-240 Web Operation Manual preview
D-PFS4226-24ET-240
Бренд: Dahua Страницы: 58
H3C Mini Series Manual preview
Mini Series
Бренд: H3C Страницы: 17
3Com OfficeConnect 5 Datasheet preview
OfficeConnect 5
Бренд: 3Com Страницы: 2
3Com OfficeConnect 3C1670500C User Manual preview
OfficeConnect 3C1670500C
Бренд: 3Com Страницы: 18
Eaton 9476-ET Instruction Manual preview
9476-ET
Бренд: Eaton Страницы: 43
G&D TradeSwitch2-USB Assembly, Installation And Operation Manual preview
TradeSwitch2-USB
Бренд: G&D Страницы: 88
Ruby Tech GS-1148L Technical Specifications preview
GS-1148L
Бренд: Ruby Tech Страницы: 2
H3C S12500G-AF Series Installation Manual preview
S12500G-AF Series
Бренд: H3C Страницы: 105
H3C S5130S-EI series Hardware Information preview
S5130S-EI series
Бренд: H3C Страницы: 67
TESmart HDK0402A1U User Manual preview
HDK0402A1U
Бренд: TESmart Страницы: 12
Origin Instruments Swifty SW2 User Manual preview
Swifty SW2
Бренд: Origin Instruments Страницы: 6
Dahua VTNS1006A-2 User Manual preview
VTNS1006A-2
Бренд: Dahua Страницы: 12
Konig CMP-KVMSWIT50 Manual preview
CMP-KVMSWIT50
Бренд: Konig Страницы: 40
Intellinet 523769 User Manual preview
523769
Бренд: Intellinet Страницы: 48
National Instruments SCXI-1130 Getting Started Manual preview
SCXI-1130
Бренд: National Instruments Страницы: 23
DANLERS CESRA PIR 10VDC Installation Notes preview
CESRA PIR 10VDC
Бренд: DANLERS Страницы: 2
Allied Telesis AT 8000/8POE Installation Manual preview
AT 8000/8POE
Бренд: Allied Telesis Страницы: 56
KTI KGS-1620 Installation Manual preview
KGS-1620
Бренд: KTI Страницы: 25

Бренды по названию

Популярные бренды

Загрузить еще бренды