D-Link xStack DGS-3420 Series, Справочное руководство

Страница: 193 / 1117

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
188
show cfm remote_mep [mepname <string 32> | md [<string 22> | md_index <uint 1-
4294967295>] ma [<string 22> | ma_index <uint 1-4294967295>] mepid <int 1-8191>]
remote_mepid <int 1-8191>
config cfm ais md [<string 22> | md_index <uint 1-4294967295>] ma [<string 22> | ma_index
<uint 1-4294967295>] mepid <int 1-8191> {period [1sec | 1min] | level <int 0-7> | state
[enable | disable]}
config cfm lock md [<string 22> | md_index <uint 1-4294967295>] ma [<string 22> | ma_index
<uint 1-4294967295>] mepid <int 1-8191> {period [1sec | 1min] | level <int 0-7> | state
[enable | disable]}
config cfm trap [ais | lock] state [enable | disable]
14-1 create cfm md
Description
This command is used to create a CFM maintenance domain.
Format
create cfm md <string 22> {md_index <uint 1-4294967295>} level <int 0-7>
Parameters
<string 22> - Enter the maintenance domain name used here. This name can be up to 22
characters long.
md_index - Specifies the maintenance domain index used.
<uint 1-4294967295> - Enter the maintenace domain index value used here. This value must
be between 1 and 4294967295.
level - Specify the maintenance domain level.
<int 0-7> - Specify the maintenance domain level from 0 to 7.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a CFM maintenance domain called “op_domain” and assign a maintenance domain level of
“2”:
DGS-3420-28SC:admin#create cfm md op_domain level 2
Command: create cfm md op_domain level 2
Success.
DGS-3420-28SC:admin#