manualshive.com logo in svg

D-Link xStack DGS-3120-24TC, Руководство по эксплуатации продукта

D-Link xStack DGS-3120-24TC - надежный коммутатор для бизнес-сетей. Чтобы ознакомиться с руководством по эксплуатации, скачайте его бесплатно на manualshive.com. Руководство предоставит вам всю необходимую информацию для эффективной работы с устройством.

Поделиться
Скачать
background image

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide 

180 

 

trTCM

 – Two Rate Three Color Marker. This, along with the srTCM, are two methods available on the switch for 

metering and marking packet flow. The trTCM meters and IP flow and marks it as a color based on the flow’s 
surpassing of two rates, the CIR and the PIR. 

CIR

 – Committed Information Rate. Common to both the trTCM and the srTCM, the CIR is measured in bytes of IP 

packets. IP packet bytes are measured by taking the size of the IP header but not the link specific headers. For the 
trTCM, the packet flow is marked green if it doesn’t exceed the CIR and yellow if it does. The configured rate of the 
CIR must not exceed that of the PIR. The CIR can also be configured for unexpected packet bursts using the CBS 
and PBS fields. 

CBS

 – Committed Burst Size. Measured in bytes, the CBS is associated with the CIR and is used to identify 

packets that exceed the normal boundaries of packet size. The CBS should be configured to accept the biggest IP 
packet that is expected in the IP flow.  

PIR

 – Peak Information Rate. This rate is measured in bytes of IP packets. IP packet bytes are measured by taking 

the size of the IP header but not the link specific headers. If the packet flow exceeds the PIR, that packet flow is 
marked red. The PIR must be configured to be equal or more than that of the CIR. 

PBS

 – Peak Burst Size. Measured in bytes, the PBS is associated with the PIR and is used to identify packets that 

exceed the normal boundaries of packet size. The PBS should be configured to accept the biggest IP packet that is 
expected in the IP flow. 

srTCM

 – Single Rate Three Color Marker. This, along with the trTCM, are two methods available on the switch for 

metering and marking packet flow. The srTCM marks its IP packet flow based on the configured CBS and EBS. A 
packet flow that does not reach the CBS is marked green, if it exceeds the CBS but not the EBS its marked yellow, 
and if it exceeds the EBS its marked red. 

CBS

 – Committed Burst Size. Measured in bytes, the CBS is associated with the CIR and is used to identify 

packets that exceed the normal boundaries of packet size. The CBS should be configured to accept the biggest IP 
packet that is expected in the IP flow. 

 

EBS

 – Excess Burst Size. Measured in bytes, the EBS is associated with the CIR and is used to identify packets 

that exceed the boundaries of the CBS packet size. The EBS is to be configured for an equal or larger rate than the 
CBS. 

DSCP

 – Differentiated Services Code Point. The part of the packet header where the color will be added. Users 

may change the DSCP field of incoming packets. 

 

The ACL Flow Meter function will allow users to color code IP packet flows based on the rate of incoming packets. 
Users have two types of Flow metering to choose from, trTCM and srTCM, as explained previously. When a packet 
flow is placed in a color code, the user can choose what to do with packets that have exceeded that color-coded 
rate.  

Green

 – When an IP flow is in the green mode, its configurable parameters can be set in the Conform field, where 

the packets can have their DSCP field changed. This is an acceptable flow rate for the ACL Flow Meter function. 

Yellow

 – When an IP flow is in the yellow mode, its configurable parameters can be set in the Exceed field. Users 

may choose to either Permit or Drop exceeded packets. Users may also choose to change the DSCP field of the 
packets.  

Red

 – When an IP flow is in the red mode, its configurable parameters can be set in the Violate field. Users may 

choose to either Permit or Drop exceeded packets. Users may also choose to change the DSCP field of the 
packets. 

 

Users may also choose to count exceeded packets by clicking the Counter check box. If the counter is enabled, the 
counter setting in the access profile will be disabled. Users may only enable two counters for one flow meter at any 
given time. 

 

To view this window, click 

ACL

 > 

ACL Flow Meter

, as shown below: 

 

Содержание xStack DGS-3120-24TC




















































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для xStack DGS-3120-24TC

Metrix SW6000 Installation Manual preview
SW6000
Бренд: Metrix Страницы: 12
Grozone Control OSWDN User Manual preview
OSWDN
Бренд: Grozone Control Страницы: 20
Micrel MIC2042 Manual preview
MIC2042
Бренд: Micrel Страницы: 15
Manhattan 177290 User Manual preview
177290
Бренд: Manhattan Страницы: 4
Comm-Tec UP-42T-CODEC User Manual preview
UP-42T-CODEC
Бренд: Comm-Tec Страницы: 48
Lightwave MX 8x8 DVI Pro User Manual preview
MX 8x8 DVI Pro
Бренд: Lightwave Страницы: 53
Articona 386428 Quick Installation Manual preview
386428
Бренд: Articona Страницы: 2
G&D DVIMUX8-USB Installation And Operation Manual preview
DVIMUX8-USB
Бренд: G&D Страницы: 80
IPGARD SDPN-2D Manual preview
SDPN-2D
Бренд: IPGARD Страницы: 15
Synergy Global Technology LCDK1023 User Manual preview
LCDK1023
Бренд: Synergy Global Technology Страницы: 9
AMX AVS-OP-2416-340 Specifications preview
AVS-OP-2416-340
Бренд: AMX Страницы: 1
NETGEAR GSM7352S - ProSafe Switch - Stackable User Manual preview
GSM7352S - ProSafe Switch - Stackable
Бренд: NETGEAR Страницы: 628
Broadcast Tools 38511 Installation Manual preview
38511
Бренд: Broadcast Tools Страницы: 10
Datavideo FS-30 Instruction Manual preview
FS-30
Бренд: Datavideo Страницы: 8
Kramer VP-444 User Manual preview
VP-444
Бренд: Kramer Страницы: 56
PairGain 150-1111-72 Quick Installation Manual preview
150-1111-72
Бренд: PairGain Страницы: 20
H3C A5500-24G Quick Start Manual preview
A5500-24G
Бренд: H3C Страницы: 8
Xylem FLOJET 02095502 Installation Manual preview
FLOJET 02095502
Бренд: Xylem Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды