xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
17
Figure 2–16 System Log & Trap Settings window (SI Mode Only)
Figure 2–17 System Log & Trap Settings window (EI Mode Only)
The fields that can be configured are described below:
Parameter
Description
Interface Name
Enter the IP interface name used.
IPv4 Address
Enter the IPv4 address used.
IPv6 Address (EI Mode
Only)
Enter the IPv6 address used.
Click the
Apply
button to accept the changes made.
Click the
Clear
button to clear all the information entered in the fields.
System Severity Settings
The Switch can be configured to allow alerts be logged or sent as a trap to an SNMP agent. The level at which the
alert triggers either a log entry or a trap message can be set as well. Use the System Severity Settings window to
set the criteria for alerts. The current settings are displayed below the System Severity Table.
To view the following window, click
System
Configuration > System Log Configuration > System Severity
Settings
, as show below:
Figure 2–18 System Severity Settings window
Содержание xStack DGS-3120-24TC
Страница 1: ......
