manualshive.com logo in svg

D-Link xStack DGS-3120-24TC, Руководство по эксплуатации продукта

D-Link xStack DGS-3120-24TC - надежный коммутатор для бизнес-сетей. Чтобы ознакомиться с руководством по эксплуатации, скачайте его бесплатно на manualshive.com. Руководство предоставит вам всю необходимую информацию для эффективной работы с устройством.

Поделиться
Скачать
background image

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide 

254 

 

State 

It is used to enable or disable the DHCP Relay Agent Information Option 82 on the 
Switch. The default is 

Disabled. 

Enabled

 –When this field is toggled to 

Enabled

, the relay agent will insert and 

remove DHCP relay information (option 82 field) in messages between DHCP 
servers and clients. When the relay agent receives the DHCP request, it adds the 
option 82 information, and the IP address of the relay agent (if the relay agent is 
configured), to the packet. Once the option 82 information has been added to the 
packet it is sent on to the DHCP server. When the DHCP server receives the 
packet, if the server is capable of option 82, it can implement policies like restricting 
the number of IP addresses that can be assigned to a single remote ID or circuit ID. 
Then the DHCP server echoes the option 82 field in the DHCP reply. The DHCP 
server unicasts the reply back to the relay agent if the request was relayed to the 
server by the relay agent. The switch verifies that it originally inserted the option 82 
data. Finally, the relay agent removes the option 82 field and forwards the packet to 
the switch port that connects to the DHCP client that sent the DHCP request. 

Disabled- 

When the field is toggled to 

Disabled

, the relay agent will not insert and 

remove DHCP relay information (option 82 field) in messages between DHCP 
servers and clients, and the check and policy settings will have no effect. 

DHCP Relay Agent 
Information Option 82 
Check 

This field can be toggled between 

Enabled

 and 

Disabled

 using the pull-down menu. 

It is used to enable or disable the Switches ability to check the validity of the 
packet’s option 82 field. 

Enabled 

– When the field is toggled to 

Enabled

, the relay agent will check the 

validity of the packet’s option 82 field. If the switch receives a packet that contains 
the option 82 field from a DHCP client, the switch drops the packet because it is 
invalid. In packets received from DHCP servers, the relay agent will drop invalid 
messages.  

Disabled 

–

 

When the field is toggled to 

Disabled

, the relay agent will not check the 

validity of the packet’s option 82 field. 

DHCP Relay Agent 
Information Option 82 
Policy 

This field can be toggled between 

Replace, Drop, 

and 

Keep

 by using the pull-down 

menu.  It is used to set the Switches policy for handling packets when the DHCP 
Relay Agent Information Option 82 Check

 

is set to  

Disabled

. The default is 

Replace.

 

Replace 

– The option 82 field will be replaced if the option 82 field already exists in 

the packet received from the DHCP client. 

Drop 

– The packet will be dropped if the option 82 field already exists in the packet 

received from the DHCP client. 

Keep 

– The option 82 field will be retained if the option 82 field already exists in the 

packet received from the DHCP client. 

DHCP Relay Agent 
Information Option 82 
Remote ID 

Here the user can enter the DHCP Relay Agent Information Option 82 Remote ID. 

DHCP Relay Option 60 
State 

Here the user can enable or disable the use of the DHCP Relay Option 60 State 
feature. If the packet does not have option 60 enabled, then the relay servers 
cannot be determined based on the option 60. In this case the relay servers will be 
determined based on either option 61 or per IPIF configured servers. If the relay 
servers are determined based on option 60 or option 61, then per IPIF configured 
servers will be ignored. If the relay servers are not determined by either option 60 
or option 61, then per IPIF configured servers will be used to determine the relay 
servers. 

enable

 – Select this option to enable the DHCP Relay Option 60 state, in order to 

relay DHCP packets. 

disable

 - Select this option to disable the DHCP Relay Option 60 state. 

DHCP Relay Option 61 
State 

Here the user can enable or disable the use of the DHCP Relay Option 61 State 
feature. When option 61 is enabled, if the packet does not have option 61, then the 
relay servers cannot be determined based on option 61. If the relay servers are 
determined based on option 60 or option 61, then per IPIF configured servers will 
be ignored. If the relay servers are not determined either by option 60 or option 61, 
then per IPIF configured servers will be used to determine the relay servers. 

Содержание xStack DGS-3120-24TC




















































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для xStack DGS-3120-24TC

ABB EDS500 Series Operating Instruction preview
EDS500 Series
Бренд: ABB Страницы: 7
ifs POC2502 Series User Manual preview
POC2502 Series
Бренд: ifs Страницы: 352
D-Link DES-3224 - Switch User Manual preview
DES-3224 - Switch
Бренд: D-Link Страницы: 75
Black Box SW730A Manual preview
SW730A
Бренд: Black Box Страницы: 26
Kramer VS-421 User Manual preview
VS-421
Бренд: Kramer Страницы: 8
DAB ESC plus 3M Instruction For Installation And Maintenance preview
ESC plus 3M
Бренд: DAB Страницы: 56
GBC 34.0109.41 Quick Start Manual preview
34.0109.41
Бренд: GBC Страницы: 2
Barox PC-IA100 Series User Manual preview
PC-IA100 Series
Бренд: Barox Страницы: 7
ALFAtron ALF-MUH88TP-N Manual preview
ALF-MUH88TP-N
Бренд: ALFAtron Страницы: 68
N-Tron 100-POE4-MDR User Manual & Installation Manual preview
100-POE4-MDR
Бренд: N-Tron Страницы: 17
H3C S5130-EI Series Manual preview
S5130-EI Series
Бренд: H3C Страницы: 32
YOKOGAWA GRVSW-660FA Technical Information preview
GRVSW-660FA
Бренд: YOKOGAWA Страницы: 74
IOGear GCS1792 Installation Manual preview
GCS1792
Бренд: IOGear Страницы: 40
Videosec RF-ZE901-220 Installation Manual preview
RF-ZE901-220
Бренд: Videosec Страницы: 3
Me CUVEO CR-UPS2000 Manual preview
CUVEO CR-UPS2000
Бренд: Me Страницы: 44
3onedata IES2010 Series Quick Installation Manual preview
IES2010 Series
Бренд: 3onedata Страницы: 2
Kramer VS-66H3 User Manual preview
VS-66H3
Бренд: Kramer Страницы: 27
Keysight Technologies E4360 Series Service Manual preview
E4360 Series
Бренд: Keysight Technologies Страницы: 75

Бренды по названию

Популярные бренды

Загрузить еще бренды