D-Link DXS-3326GSR - xStack Switch - Stackable, Руководство пользователя

Страница: 206 / 286

DXS-3326GSR Gigabit Layer 3 Switch
MIBs
Management and counter information are stored by the Switch in the Management Information Base (MIB). The Switch
uses the standard MIB-II Management Information Base module. Consequently, values for MIB objects can be retrieved
from any SNMP-based network management software. In addition to the standard MIB-II, the Switch also supports its own
proprietary enterprise MIB as an extended Management Information Base. The proprietary MIB may also be retrieved by
specifying the MIB Object Identifier. MIB values can be either read-only or read-write.
The Switch incorporates a flexible SNMP management for the switching environment. SNMP management can be
customized to suit the needs of the networks and the preferences of the network administrator. Use the SNMP V3 menus to
select the SNMP version used for specific tasks.
The DXS-3326GSR supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. The administrator
can specify the SNMP version used to monitor and control the Switch. The three versions of SNMP vary in the level of
security provided between the management station and the network device.
SNMP settings are configured using the menus located on the SNMP V3 folder of the web manager. Workstations on the
network that are allowed SNMP privileged access to the Switch can be restricted with the Management Station IP Address
menu.
SNMP User Table
The SNMP User Table displays all of the SNMP User's currently configured on the Switch.
In the SNMP Manager folder, click on the SNMP User Table link. This will open the SNMP User Table window, as
shown below.
Figure 9- 1. SNMP User Table window
To delete an existing SNMP User Table entry, click the below the Delete heading corresponding to the entry you wish
to delete.
To display the detailed entry for a given user, click on the hyperlinked User Name. This will open the SNMP User Table
Display window, as shown below.
Figure 9- 2. SNMP User Table Display window
The following parameters are displayed:
193