DXS-3326GSR Gigabit Layer 3 Switch
Daylight Saving
Time State
Use this pull-down menu to enable or disable the DST Settings.
Daylight Saving
Time Offset in
Minutes
Use this pull-down menu to specify the amount of time that will constitute your local DST
offset - 30, 60, 90, or 120 minutes.
Time Zone Offset
from GMT in +/-
HH:MM
Use these pull-down menus to specify your local time zone's offset from Greenwich
Mean Time (GMT.)
DST Repeating Settings
- Using repeating mode will enable DST seasonal time adjustment. Repeating mode
requires that the DST beginning and ending date be specified using a formula. For example, specify to begin
DST on Saturday during the second week of April and end DST on Sunday during the last week of October.
From: Which Day
Enter the week of the month that DST will start.
From: Day of Week
Enter the day of the week that DST will start on.
From: Month
Enter the month DST will start on.
From: time in
HH:MM
Enter the time of day that DST will start on.
To: Which Day
Enter the week of the month the DST will end.
To: Day of Week
Enter the day of the week that DST will end.
To: Month
Enter the month that DST will end.
To: time in HH:MM
Enter the time DST will end.
DST Annual Settings
- Using annual mode will enable DST seasonal time adjustment. Annual mode requires
that the DST beginning and ending date be specified consisely. For example, specify to begin DST on April 3
and end DST on October 14.
From: Month
Enter the month DST will start on, each year.
From: Day
Enter the day of the month DST will start on, each year.
From: time in
HH:MM
Enter the time of day DST will start on, each year.
To: Month
Enter the month DST will end on, each year.
To: Day
Enter the day of the month DST will end on, each year.
To: Time in HH:MM
Enter the time of day that DST will end on, each year.
Click
Apply
to implement changes made to the
Time Zone and DST
Settings
window.
Access Profile Table
Configuring the Access Profile Table
Access profiles allow you to establish criteria to determine whether or not the Switch will forward packets based on the
information contained in each packet's header. These criteria can be specified on a basis of VLAN, MAC address or IP
address.
95
Содержание DXS-3326GSR - xStack Switch - Stackable
Страница 20: ...DXS 3326GSR Gigabit Layer 3 Switch Figure 1 5 Side Panels 7...
Страница 130: ...DXS 3326GSR Gigabit Layer 3 Switch Figure 6 72 Initialize Port Port Based window 117...
Страница 236: ...DXS 3326GSR Gigabit Layer 3 Switch Figure 10 2 Authenticator State Port Based 802 1x window 2 223...
Страница 286: ......