D-Link DWS-1008 CLI Manual
11
show log trace
Displays system information stored in the nonvolatile log buffer or the trace buffer.
Syntax: show log trace [{
+|-|/
}
number-of-messages
] [facility
facility-name
]
[matching
string
] [severity
severity-level
]
trace
Displays the log messages in the trace buffer.
+|-|/
Displays the number of messages specified as follows:
number-of-messages
• A positive number (for example, +100), displays that number of
log entries starting from the oldest in the log.
• A negative number (for example, -100) displays that number of
log entries starting from newest in the log.
• A number preceded by a slash (for example, /100) displays that
number of the most recent log entries in the log, starting with the
least recent.
facility
facility-name
Area of MSS that is sending the log message. Type a space and
a question mark (?) after show log trace facility for a list of valid
facilities.
matching
string
Displays messages that match a string—for example, a username or
IP address.
severity
severity-level
Displays messages at a severity level greater than or equal to the level
specified. Specify one of the following:
•
emergency—The switch is unusable.
•
alert—Action must be taken immediately.
•
critical—You must resolve the critical conditions. If the conditions
are not resolved, the switch can reboot or shut down.
•
error—The switch is missing data or is unable to form a
connection.
•
warning—A possible problem exists.
•
notice—Events that potentially can cause system problems have
occurred. These are logged for diagnostic purposes. No action is
required.
•
info—Informational messages only. No problem exists.
•
debug—Output from debugging.
Defaults: None.
Access: Enabled.
Содержание DWS-1008
Страница 1: ......
Страница 27: ...D Link DWS 1008 CLI Manual 24 ...
