manualshive.com logo in svg

D-Link DWS-1008, Справочное руководство CLI

Поделиться
Скачать
D-Link DWS-1008 Скачать руководство пользователя страница 143

D-Link DWS-1008 CLI Manual

10

set snmp notify target

Configures a notification target for notifications from SNMP.

A notification target is a remote device to which MSS sends SNMP notifications. You can configure 
the  MSS  SNMP  engine  to  send  confirmed  notifications  (informs)  or  unconfirmed  notifications 
(traps). Some of the command options differ depending on the SNMP version and the type of 
notification you specify. 

You can configure up to 10 notification targets.

SNMPv3 with Informs

To configure a notification target for informs from SNMPv3, use the following command: 

Syntax: set snmp notify target 

target-num ip-addr 

[

:udp-port-number

]

  

usm inform user 

username

 snmp-engine-id {ip | hex 

hex-string

}

  

[profile

 profile-name

] [security {unsecured | authenticated | encrypted}]

  

[retries 

num

] [timeout 

num

] 

target-num 

   

 

ID for the target. This ID is local to the switch and does not need to   

  

 

 

 

correspond to a value on the target itself. You can specify a number   

  

 

 

 

from 1 to 10.

ip-addr[:udp-port-number]

  IP address of the server. You also can specify the UDP port number  

  

 

 

 

to send notifications to.

username

    

 

USM username. This option is applicable only when the SNMP  

 

  

 

 

 

version is usm. If the user will send informs rather than traps,  

 

  

 

 

 

you also must specify the snmp-engine-id of the target. 

snmp-engine-id 

 

SNMP engine ID of the target. Specify ip if SNMP engine ID

{ip | hex 

hex-string

}   

the target’s SNMP engine ID is based on its IP address. If the  

 

  

 

 

 

target’s SNMP engine ID is a hexadecimal value, use hex hex-string

  

 

 

 

to specify the value.

profile 

profile-name

   

Notification profile this SNMP user will use to specify the notification  

  

 

 

 

types to send or drop. 

security {unsecured | 

 

Specifies the security level, and is applicable only when the    

authenticated | encrypted}  

SNMP version is usm:

• 

unsecured—Message  exchanges  are  not  authenticated, 
nor are they encrypted. This is the default.

• 

authenticated—Message  exchanges  are  authenticated, 
but are not encrypted.

• 

encrypted—Message  exchanges  are  authenticated  and 
encrypted.

Содержание DWS-1008




















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды