DVG-N5402G/ACF
Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
Overview
LED
Mode
Description
PHONE 1-2
Solid green
The receiver is on-hook, the phone is registered on the
SIP server.
Solid red
The receiver is off-hook, the phone is registered on the
SIP server.
Blinking green
The receiver is on-hook, an error occurred upon
registration on the SIP server.
Fast blinking red
If the receiver is on-hook: an incoming call.
If the receiver is off-hook: dialing or talking.
Slow blinking red
The line is busy.
No light
The phone is not registered on the SIP server.
LINE
Solid green
Activity of the PSTN port (an incoming or outgoing
call, dialing or talking).
No light
The phone line is not connected or in the idle state.
On the right side panel of the router there is a
WPS
button designed to set up a secure wireless
connection (the WPS function) and enable/disable the wireless network.
To use the WPS function: with the device turned on, push the button, hold it for 2 seconds, and
release. The
WPS
LED should be blinking blue.
To enable/disable the router's wireless network: with the device turned on, press the button, hold for
10 seconds, and then release it.
A separate LED is located on the
WPS
button.
LED
Mode
Description
WPS
Blinking blue
Attempting to add a wireless device via the WPS
function.
No light
The WPS function is not in use.
Page
15
of 259
