DVG-N5402G/ACF
Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
Configuring via Web-based Interface
To edit fields in the
Tunneled networks
section, select a needed field in the relevant line of the
table and change its value.
To remove IP addresses of subnets, select the checkbox located to the left of the relevant line in the
table and click the
Delete
button.
Click the
Apply
button.
After clicking the
Apply
button, the page with the sections
IPsec
and
Status
opens.
To edit the parameters of an existing tunnel, in the
IPsec
section, select the relevant tunnel in the
table. On the opened page, change the needed parameters and click the
Apply
button.
To remove an existing tunnel, select the checkbox located to the left of the relevant line in the table
and click the
Delete
button.
In the
Status
section, the current state of an existing tunnel is displayed.
To disable VPN tunnels based on IPsec protocol, deselect the
Enabled
checkbox.
Page
193
of 259
