DVG-N5402G/ACF
Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
Configuring via Web-based Interface
System Time
On the
System / System time
page, you can manually set the time and date of the router or
configure automatic synchronization of the system time with a time server on the Internet.
Figure 184. The
System / System time
page.
To set the system time manually, select the
Manual
value from the
Mode
drop-down list and set
the time and date in the fields displayed. Then click the
Apply
button.
To enable automatic synchronization with a time server, follow the next steps:
1. Select the
NTP
value from the
Mode
drop-down list.
2. Select your time zone from the drop-down list. To set the time zone in accordance with the
settings of your operating system, click the
Determine timezone
button in the bottom
right corner of the page.
3. Specify the needed NTP server in the
NTP servers
field or leave the server specified by
default.
4. Click the
Apply
button.
To enable automatic adjustment for daylight saving time of the router, select the
Daylight saving
time
checkbox.
In some cases NTP servers addresses are provided by your ISP. In this case, you need to select the
Get NTP server addresses using DHCP
checkbox. Contact your ISP to clarify if this
checkbox needs to be enabled. If the
Get NTP server addresses using DHCP
checkbox is
selected, the
NTP servers
field is not available.
Page
247
of 259