D-Link DVG-N5402G/ACF, Руководство пользователя

Страница: 198 / 259

DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
Configuring via Web-based Interface
You can specify the following parameters:
Parameter Description
Template
Select a virtual server template from the drop-down list, or select
Custom
to specify all parameters of the new virtual server
manually.
Name
A name for the virtual server for easier identification. You can
specify any name.
Interface
A WAN connection to which this virtual server will be assigned.
Protocol
A protocol that will be used by the new virtual server. Select a value
from the drop-down list.
Public port (begin)/
Public port (end)
A port of the router from which traffic is directed to the IP address
specified in the
Private IP field. Specify the start and the end value
for the port range. If you need to specify one port, enter the needed
value in the
Public port (begin) field and leave the Public port
(end) field blank.
Private port (begin)/
Private port (end)
A port of the IP address specified in the Private IP field to which
traffic is directed from the Public port . Specify the start and the
end value for the port range. If you need to specify one port, enter
the needed value in the
Private port (begin)
field and leave the
Private port (end) field blank.
Private IP
The IP address of the server from the local area network. To choose
a device connected to the router's LAN at the moment, select the
relevant value from the drop-down list (the field will be filled in
automatically).
Click the
Apply
button.
To edit the parameters of an existing server, select the relevant server in the table. On the opened
page, change the needed parameters and click the
Apply
button.
To remove a server, select the checkbox located to the left of the relevant line in the table and click
the
Delete button. Also you can remove a server on the editing page.
To remove all servers from this page, click the Clear all button.
In the Remote access configuration section, rules created on the Advanced / Remote
access to device
page are displayed. If after creating virtual servers you need to edit rules for
remote access, you can quickly get to the Advanced / Remote access to device page by
clicking the link to the relevant rule.
Page 198 of 259