DVG-N5402G/ACF
Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
Configuring via Web-based Interface
Control
Description
Wireless
The
Wireless
element displays information on Wi-Fi module
operation in the 2.4GHz band. T
o switch to the editing mode of
Wi-
Fi module settings in the 5GHz band, click the icon
(
Band
).
To the left, the name of the access point is displayed. You can
change it in the editing mode.
Use the
Hide Access Point
switch ( / ) to forbid or allow
other
users to see your wireless network.
Use the
Enable/Disable Wireless
switch (
) to enable or
disable your wireless network.
To the right, the standards of devices which can connect to the
access point are displayed. You can select other standards from the
drop-down list.
Use the
Enable/Disable password protection
switch ( / )
to modify security settings of your wireless network. If you want to
view or change the password, switch to the editing mode of the
relevant field.
Wi-Fi Filter
The
Wi-Fi Filter
element displays the number of MAC addresses
specified in the MAC filter. Place the mouse pointer over the icon to
view the list of MAC addresses, remove existing addresses, or add
new ones.
Use the
Enable/Disable Wi-Fi filter
switch (
) to enable or
disable the Wi-Fi filter.
Use the drop-down list to the right of the element to quickly change
the mode of the filter (allow or forbid access to your wireless
network).
To save new settings, left-click the notification displayed in the top right part of the page.
In this section, you can contact the technical support group (to send an e-mail). To do this, left-click
the support e-mail address in the bottom right corner of the page. After clicking the line, the e-mail
client window for sending a new letter to the specified address opens.
Page
46
of 259
