DVG-N5402G/ACF
Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
Configuring via Web-based Interface
Figure 139. The page for adding a rule for remote management.
You can specify the following parameters:
Parameter
Description
Open access from any
external host
Select the checkbox to allow access to the router for any host. When
the checkbox is selected, the
IP version
drop-down list is
displayed on the page, and the
IP address
and
Mask
fields are not
available for editing.
IP version
An IP version to which the rule will be applied. Select the relevant
value from the drop-down list.
IP address
A host or a subnet to which the rule is applied. You can specify an
IPv4 or IPv6 address.
Mask
For the IPv4-based network only.
The mask of the subnet.
Public port
For the IPv4-based network only.
An external port of the router. You can specify only one port.
Protocol
The protocol available for remote management of the router.
After specifying the needed parameters, click the
Apply
button.
To edit a rule for remote access, click the link to the relevant rule. On the opened page, change the
needed parameters and click the
Apply
button.
Page
182
of 259
