manualshive.com logo in svg

D-Link DGS-3620-28PC-EI, Руководство по эксплуатации продукта

D-Link DGS-3620-28PC-EI - высокопроизводительный коммутатор с управлением, обеспечивающий надежное подключение в сети. Продукт Manual доступен для свободного скачивания с нашего сайта. Получите подробные инструкции по эксплуатации manualshive.com и настройке вашего устройства для оптимальной производительности.

Поделиться
Скачать
background image

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide 

41 

 

•

  The user can manually configure a CaS to become a CS 

•

  The CaS can be configured through the CS to become a MS.  

 
After configuring one switch to operate as the CS of a SIM group, additional DGS-3620 Series switches may join 

the group by manually configuring the Switch to be a MS. The CS will then serve as the in band entry point for 

access to the MS. The CS’s IP address will become the path to all MS’s of the group and the CS’s Administrator’s 

password, and/or authentication will control access to all MS’s of the SIM group. 
 
With SIM enabled, the applications in the CS will redirect the packet instead of executing the packets. The 

applications will decode the packet from the administrator, modify some data, and then send it to the MS. After 

execution, the CS may receive a response packet from the MS, which it will encode and send it back to the 

administrator. 
 
When a CaS becomes a MS, it automatically becomes a member of the first SNMP community (includes read/write 

and read only) to which the CS belongs. However, if a MS has its own IP address, it can belong to SNMP 

communities to which other switches in the group, including the CS, do not belong. 
 

To better improve SIM management, the DGS-3620 Series switches have been upgraded to version 1.61 in this 

release. Many improvements have been made, including: 

Upgrade to v1.61 

1.  The Commander Switch (CS) now has the capability 

to automatically rediscover member switches that 

have left the SIM group, either through a reboot or 

web malfunction. This feature is accomplished 

through the use of Discover packets and Maintenance 

packets that previously set SIM members will emit 

after a reboot. Once a MS has had its MAC address 

and password saved to the CS’s database, if a reboot 

occurs in the MS, the CS will keep this MS 

information in its database and when a MS has been 

rediscovered, it will add the MS back into the SIM tree 

automatically. No configuration will be necessary to 

rediscover these switches. 

There are some instances where pre-saved MS switches 

cannot be rediscovered. For example, if the Switch is still 

powered down, if it has become the member of another group, 

or if it has been configured to be a Commander Switch, the 

rediscovery process cannot occur. 
 

2.  The topology map now includes new features for connections that are a member of a port trunking group. It 

will display the speed and number of Ethernet connections creating this port trunk group, as shown in the 

adjacent picture. 

3.  This version will support switch upload and downloads for firmware, configuration files and log files, as 

follows: 

a. 

Firmware

 – The switch now supports MS firmware downloads from a TFTP server. 

b. 

Configuration Files

 – This switch now supports downloading and uploading of configuration files both 

to (for configuration restoration) and from (for configuration backup) MS’s, using a TFTP server. 

c. 

Log

 – The Switch now supports uploading MS log files to a TFTP server. 

4.  The user may zoom in and zoom out when utilizing the topology window to get a better, more defined view 

of the configurations. 

 

Single IP Settings 

The Switch is set as a Candidate (CaS) as the factory default configuration and Single IP Management is disabled. 
To view the following window, click 

Management > Single IP Management > Single IP Settings

, as show below: 

 

Содержание DGS-3620-28PC-EI























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DGS-3620-28PC-EI

Movie Vision VCS-3 Installation And User Manual preview
VCS-3
Бренд: Movie Vision Страницы: 2
SMC Networks SMC8724-10BT Technical Specifications preview
SMC8724-10BT
Бренд: SMC Networks Страницы: 2
Omega Engineering PSW32 SERIES User Manual preview
PSW32 SERIES
Бренд: Omega Engineering Страницы: 8
Baxall DVS24 Installation And Operating Instructions Manual preview
DVS24
Бренд: Baxall Страницы: 33
G&D DL-DVI-MUX2-NT SERIES Installation And Operation Manual preview
DL-DVI-MUX2-NT SERIES
Бренд: G&D Страницы: 76
S+S Regeltechnik HYGRASREG KW Series Operating Instructions, Mounting & Installation preview
HYGRASREG KW Series
Бренд: S+S Regeltechnik Страницы: 16
Atlantis Land A02-F5 Manual preview
A02-F5
Бренд: Atlantis Land Страницы: 3
RONK VIGILANT VTS0400 Owners & Installation Manual preview
VIGILANT VTS0400
Бренд: RONK Страницы: 32
Racal Instruments 1260-X121 User Manual preview
1260-X121
Бренд: Racal Instruments Страницы: 33
Unipoe PM5003GSN User Manual preview
PM5003GSN
Бренд: Unipoe Страницы: 9
Cabletron Systems ELS10-26TX User Manual preview
ELS10-26TX
Бренд: Cabletron Systems Страницы: 116
Black Box SW485A User Manual preview
SW485A
Бренд: Black Box Страницы: 50
CrimeStopper SECURVIEW SV-7020 Installation Diagram preview
SECURVIEW SV-7020
Бренд: CrimeStopper Страницы: 1
Dusun DSW-080 User Manual preview
DSW-080
Бренд: Dusun Страницы: 18
Enable-IT 8808F Installation Manual Manual preview
8808F
Бренд: Enable-IT Страницы: 49
Allied Telesis AT 8000/8POE Installation Manual preview
AT 8000/8POE
Бренд: Allied Telesis Страницы: 56
DANLERS ControlZAPP CZ CEFL 10VDC Installation Notes preview
ControlZAPP CZ CEFL 10VDC
Бренд: DANLERS Страницы: 2
ALFAtron SC121D-TN User Manual preview
SC121D-TN
Бренд: ALFAtron Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды