D-Link DGS-3620-28PC-EI, Руководство по эксплуатации продукта

Страница: 27 / 502

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
17
Serial Port Settings
This window allows the user to adjust the Baud Rate and the Auto Logout values.
To view the following window, click
System Configuration > Serial Port Settings
, as show below:
Figure 2-10 Serial Port Settings window
The fields that can be configured are described below:
Parameter Description
Baud Rate
Specify the baud rate for the serial port on the Switch. There are four possible baud rates to
choose from,
9600
,
19200
,
38400
and
115200.
For a connection to the Switch using the
console port, the baud rate must be set to 115200, which is the default setting.
Auto Logout
Select the logout time used for the console interface. This automatically logs the user out
after an idle period of time, as defined. Choose from the following options:
2, 5, 10, 15
minutes
or
Never
. The default setting is 10 minutes.
Data Bits
Display the data bits used for the serial port connection.
Parity Bits
Display the parity bits used for the serial port connection.
Stop Bits
Display the stop bits used for the serial port connection.
Click the
Apply
button to implement changes made.
Warning Temperature Settings
This window allows the user to configure the system warning temperature parameters.
To view the following window, click
System Configuration > Warning Temperature Settings
, as show below:
Figure 2-11 Warning Temperature Settings window
The fields that can be configured are described below:
Parameter Description
Traps State
Use the drop-down menu to enable or disable the traps state option of the warning
temperature setting.
Log State
Use the drop-down menu to enable or disable the log state option of the warning
temperature setting.
High Threshold
Enter the high threshold value of the warning temperature setting.