D-Link DGS-3620-28PC-EI, Руководство по эксплуатации продукта

Страница: 261 / 502

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
251
BGP Routing Table
This window displays BGP routing.
To view the following window, click
L3 Features > BGP > BGP Routing Table
, as shown below:
Figure 5-140 BGP Routing Table window
The fields that can be configured are described below:
Parameter Description
Type
Use the drop-down menu to select Regexp, Filter List, Route Map, Prefix List, CIDR Only,
Inconsistent AS, Community, Community List, IP Address or Network. The parameters in
the lower section changes based on the selected type.
Regexp
Enter the regular expression that defines the AS path filter.
Filter List Name
Enter the filter list name that was previously created in BGP AS Path Access Settings
window. This is used to display routes conforming to the filter list.
Route Map Name
Enter the filter list name that was previously created by route map. This is used to display
routes matching the route map.
Prefix List Name
Enter the filter list name that was previously created by IP prefix list. This is used to
display routes conforming to the prefix list.
CIDR Only
Tick Classless Inter-Domain Routing (CIDR) Only to just display routes with custom
masks.
Inconsistent AS
Tick the check box to display the routes if they have of same prefix but different AS path
originate.
Community Community Set
– Tick the check box and enter the community set. This value can be up
to 80 characters long.
Local AS
- Do not send outside local AS (well-known community).
No Advertise
- Do not advertise to any peer (well-known community).
No Export
- Do not export to next AS (well-known community).
Internet
- Send to the Internet (well-known community>.
Exact Match
- If selected, communities need to match exactly.
Community List
Enter the community list. If the
Exact Match
check box is selected, communities need to
match exactly.
IP Address
Display the host route that matches the specified IP address.