D-Link DGS-3620-28PC-EI Скачать руководство пользователя страница 369

Страница: 369 / 502

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide

359

Figure 8-49 Compound Authentication Settings window

The fields that can be configured are described below:

Parameter

Description

Authorization Attributes
State

Click the radio buttons to enable of disable the Authorization Attributes State.

Authentication Server
Failover

Click the radio buttons to configure the authentication server failover function.

Block

(default setting) - The client is always regarded as un-authenticated.

Local

- The switch will resort to using the local database to authenticate the

client. If the client fails on local authentication, the client is regarded as un-

authenticated, otherwise, it authenticated.

Permit

- The client is always regarded as authenticated. If guest VLAN is

enabled, clients will stay on the guest VLAN, otherwise, they will stay on the

original VLAN.

Unit

Select the unit you want to configure.

From Port / To Port

Use the drop-down menus to select a range of ports to be enabled as

compound authentication ports.

Authentication Methods

The compound authentication method options include:

None

Any (MAC,

802.1X, JWAC or WAC)

802.1X+IMPB

IMPB+JWAC

IMPB+WAC

, and

MAC+IMPB

None

- all compound authentication methods are disabled.

Any (MAC, 802.1X, JWAC or WAC)

- if any of the authentication methods

pass, then access will be granted. In this mode, MAC, 802.1X, JWAC and

WAC can be enabled on a port at the same time. In Any (MAC, 802.1X,

JWAC or WAC) mode, whether an individual security module is active on a

port depends on its system state.

802.1X+IMPB

- 802.1X will be verified first, and then IMPB will be verified.

Both authentication methods need to be passed.

Содержание DGS-3620-28PC-EI























































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-3620-28PC-EI

Отзывы:

Похожие инструкции для DGS-3620-28PC-EI

Бренды по названию

Популярные бренды

D-Link DGS-3620-28PC-EI, Руководство по эксплуатации продукта

Результаты поиска

Содержание DGS-3620-28PC-EI

Отзывы:

Похожие инструкции для DGS-3620-28PC-EI

Бренды по названию

Популярные бренды