D-Link DES-3326SR Layer 3 Switch
Parameter Description
Profile ID
Type in a unique identifier number for this profile set or allow an ID to be
automatically assigned by checking the Auto Assign option. This value can be
set from 1 – 255. The profile ID sets the relative priority for the profile and
specifies an index number that will identify the cpu access profile being created
with this command. Priority is set relative to other profiles where the lowest
profile ID has the highest priority.
Access Profile
Select profile based on Ethernet (MAC Address) or IP address. This will
change the menu according to the requirements for the type of profile. Select
Ethernet to instruct the switch to examine the layer 2 part of each packet
header. Select IP to instruct the switch to examine the IP address in each
frame’s header.
VLAN
Selecting this option instructs the switch to examine the VLAN part of each
packet header and use this as the, or part of the criterion for forwarding.
Source IP Mask
Enter an IP address mask for the source IP address.
Destination IP Mask
Destination IP Mask - Enter an IP address mask for the destination MAC
address.
DSCP
Selecting this option instructs the switch to examine the DiffServ Code part of
each packet header and use this as the, or part of the criterion for forwarding.
Protocol*
(for IP address
Access Profiles only)
*
TCP flag mask
parameter can be
implemented using
the CLI interface.
This option is not
available using the
web interface.
Selecting this option instructs the switch to examine the protocol type value in
each frame’s header. You must then specify what protocol(s) to include
according to the following guidelines:
Select ICMP to instruct the switch to examine the Internet Control Message
Protocol (ICMP) field in each frame’s header.
Select Type to further specify that the access profile will apply an ICMP type
value, or specify Code to further specify that the access profile will apply an
ICMP cod value.
Select IGMP to instruct the switch to examine the Internet Group Management
Protocol (ICMP) field in each frame’s header.
Select Type to further specify that the access profile will apply an IGMP type
value
Select TCP to use the TCP port number contained in an incoming packet as
the forwarding criterion. Selecting TCP requires that you specify a source port
mask and/or a destination port mask.
Source Port Mask Ox - Specify a TCP port mask for the source port in hex
form (hex 0x0-0xffff).
Destination Port Mask Ox - Specify a TCP port mask for the destination port in
hex form (hex 0x0-0xffff).
Select UDP to use the UDP port number contained in an incoming packet as
the forwarding criterion. Selecting UDP requires that you specify a source port
mask and/or a destination port mask.
Source Port Mask Ox - Specify a TCP port mask for the source port in hex
form (hex 0x0-0xffff).
Destination Port Mask Ox - Specify a TCP port mask for the destination port in
hex form (hex 0x0-0xffff).
87
Содержание DES-3326SR
Страница 240: ......
