D-Link 800 - DFL 800 - Security Appliance Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 469

background image

The CLI command to do this would be:

gw-world:/> set Address IP4Address ip_lan Address=10.1.1.2

This same operation could also be done through the Web Interface.

A summary of CLI commands that can be used with Ethernet interfaces can be found in
Section 3.3.2.1, “Useful CLI Commands for Ethernet Interfaces”.

Network Addresses

In addition to the interface IP address, a Network address is also specified for an Ethernet interface.
The Network address provides information to NetDefendOS about what IP addresses are directly
reachable through the interface. In other words, those residing on the same LAN segment as the
interface itself. In the routing table associated with the interface, NetDefendOS will automatically
create a direct route to the specified network over the actual interface.

Specifying a Default Gateway

A Default Gateway address can optionally be specified for an Ethernet interface. This is a normally
the address of a router and very often the router which acts as the gateway to the Internet.

Normally, only one default all-nets route to the default gateway needs to exist in the routing table.

Using DHCP on Ethernet Interfaces

NetDefendOS includes a DHCP client for dynamic assignment of address information. The
information that can be set using DHCP includes the IP address of the interface, the local network
that the interface is attached to, and the default gateway.

All addresses received from the DHCP server are assigned to corresponding IP4Address objects. In
this way, dynamically assigned addresses can be used throughout the configuration in the same way
as static addresses. By default, the objects in use are the same ones as defined in Section 3.1.5,
“Auto-Generated Address Objects”.

Example 3.10. Enabling DHCP

CLI

gw-world:/> set Interface Ethernet wan DHCPEnabled=Yes

Web Interface

1.

Go to Interfaces > Ethernet

2.

In the grid, click on the ethernet object of interest

3.

Enable the Enable DHCP client option

4.

Click OK

3.3.2.1. Useful CLI Commands for Ethernet Interfaces

This section summarizes the CLI commands most commonly used for examining and manipulating
NetDefendOS Ethernet interfaces.

3.3.2. Ethernet Interfaces

Chapter 3. Fundamentals

83

«
...
81
82
83
84
85
...
»

Содержание 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 800 - DFL 800 - Security Appliance

TPL NET Network Module

Бренд: Teknim Страницы: 3

NCA-4010 Series

Бренд: Lanner Страницы: 111

Бренд: SonicWALL Страницы: 6

Бренд: SonicWALL Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды