D-Link 800 - DFL 800 - Security Appliance, Руководство пользователя

Страница: 62 / 469

2.5. The pcapdump Command
A valuable diagnostic tool is the ability to examine the packets that enter and leave the interfaces of
a D-Link Firewall. For this purpose, NetDefendOS provides the CLI command pcapdump which not
only allows the examination of packet streams entering and leaving interfaces but also allows the
filtering of these streams according to specified criteria.
The packets that are filtered out by pcapdump can then be saved in a file of type .cap which is the
defacto libpcap library file format standard for packet capture.
The complete syntax of the pcapdump command is described in the <emphasis>CLI Reference
Guide</emphasis>.
A Simple Example
An example of pcapdump usage is the following sequence:
> pcapdump -size 1024 -start int
> pcapdump -stop int
> pcapdump -show
> pcapdump -write int -filename=cap_int.cap
> pcapdump -cleanup
Going through this line by line we have:
1. Recording is started for the int interface using a buffer size of 1024 Kbytes.
> pcapdump -size 1024 -start int
2. The recording is stopped for the int interface.
> pcapdump -stop int
3. The dump output is displayed on the console in a summarized form.
> pcapdump -show
4. The same information is written in its complete form to a file called cap_int.cap.
> pcapdump -write int -filename=cap_int.cap
At this point, the file cap_int.cap should be downloaded to the management workstation for
analysis.
5. A final cleanup is performed and all memory taken is released.
> pcapdump -cleanup
Re-using Capture Files
Since the only way to delete files from the D-Link Firewall is through the serial console, the
recommendation is to always use the same filename when using the pcapdump -write option. Each
new write operation will then overwrite the old file.
Running on Multiple Interfaces
2.5. The pcapdump Command Chapter 2. Management and Maintenance
62