D-Link 800 - DFL 800 - Security Appliance Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 469

D-Link 800 - DFL 800 - Security Appliance Скачать руководство пользователя страница 48

*

ServiceTCPUDP

telnet

A "+" character in front of the row indicates that the object has been added. A "*" character indicates that the
object has been modified. A "-" character indicates that the object has been marked for deletion.

Web Interface

1.

Go to Configuration > View Changes in the menu bar

A list of changes is displayed

Activating and Committing a Configuration

After changes to a configuration have been made, the configuration has to be activated for those
changes to have an impact on the running system. During the activation process, the new proposed
configuration is validated and NetDefendOS will attempt to initialize affected subsystems with the
new configuration data.

Committing IPsec Changes

The administrator should be aware that if any changes that affect the configurations of
live IPsec tunnels are committed, then those live tunnels connections WILL BE
TERMINATED and must be re-established.

If the new configuration is validated, NetDefendOS will wait for a short period (30 seconds by
default) during which a connection to the administrator must be re-established. As described
previously, if the configuration was activated via the CLI with the activate command then a commit
command must be issued within that period. If a lost connection could not be re-established or if the
commit command was not issued, then NetDefendOS will revert to using the previous configuration.
This is a fail-safe mechanism and, amongst others things, can help prevent a remote administrator
from locking themselves out.

Example 2.10. Activating and Committing a Configuration

This example shows how to activate and commit a new configuration.

CLI

gw-world:/> activate

The system will validate and start using the new configuration. When the command prompt is shown again:

gw-world:/> commit

The new configuration is now committed.

Web Interface

1.

Go to Configuration > Save and Activate in the menu bar

2.

Click OK to confirm

The web browser will automatically try to connect back to the Web Interface after 10 seconds. If the connection
succeeds, this is interpreted by NetDefendOS that remote management is still working. The new configuration is
then automatically committed.

Note

The configuration must be committed before changes are saved. All changes to a
configuration can be ignored simply by not committing a changed configuration.

2.1.9. Working with Configurations

Chapter 2. Management and Maintenance

48

«
...
46
47
48
49
50
...
»

Содержание 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Отзывы:

Нет отзывов