D-Link 800 - DFL 800 - Security Appliance, Руководство пользователя

Страница: 207 / 469

Allow/Disallow Read The TFTP GET function can be disabled so that files cannot
be retrieved by a TFTP client. The default value is Allow.
Allow/Disallow Write The TFTP PUT function can be disabled so that files cannot
be written by a TFTP client. The default value is Allow.
Remove Request Option
Specifies if options should be removed from request. The
default is False which means "do not remove".
Block Unknown Options This option allows the blocking of any option in a request
other than the blocksize, the timeout period and the file
transfer size. The default is False which means "do not
block".
TFTP Request Options
As long as the Remove Request Option described above is set to false (options are not removed)
then the following request option settings can be applied:
Maximum Blocksize The maximum blocksize allowed can be specified. The
allowed range is 0 to 65464 bytes. The default value is 65464
bytes.
Maximum File Size The maximum size of a file transfer can be restricted. By
default this is the absolute maximum allowed which 999,999
Kbytes.
Allow Directory Traversal This option can disallow directory traversal through the use of
filenames containing consecutive periods ("..").
Allowing Request Timeouts
The NetDefendOS TFTP ALG blocks the repetition of an TFTP request coming from the same
source IP address and port within a fixed period of time. The reason for this is that some TFTP
clients might issue requests from the same source port without allowing an appropriate timeout
period.
6.2.5. The SMTP ALG
Simple Mail Transfer Protocol (SMTP) is a text based protocol used for transferring email between
mail servers over the Internet. Typically the local SMTP server will be located on a DMZ so that
mail sent by remote SMTP servers will traverse the D-Link Firewall to reach the local server (this
setup is illustrated later in Section 6.2.5.1, “DNSBL SPAM Filtering”). Local users will then use
email client software to retrieve their email from the local SMTP server.
SMTP is also used when clients are sending email and the SMTP ALG can be used to monitor
SMTP traffic originating from both clients and servers.
SMTP ALG Options
Key features of the SMTP ALG are:
Email Rate Limiting
A maximum allowable rate of email messages can be
specified. This rate is calculated on a per source IP address
basis, in other words it is not the total rate that is of interest
but the rate from a certain email source.
6.2.5. The SMTP ALG Chapter 6. Security Mechanisms
207