In other words, the amount of time in tens of seconds that a tunnel is without traffic or any other
sign of life before the peer is considered dead. If DPD is due to be triggered but other evidence of
life is seen (such as IKE packets from the other side of the tunnel) within the time frame, no
DPD-R-U-THERE messages will be sent.
For example, if the other side of the tunnel has not sent any ESP packets for a long period but at
least one IKE-packet has been seen within the last (10 x the configured value) seconds, then
NetDefendOS will not send more DPD-R-U-THERE messages to the other side.
Default: 3 (in other words, 3 x 10 = 30 seconds)
DPD Keep Time
The amount of time in tens of seconds that a peer is assumed to be dead after NetDefendOS has
detected it to be so. While the peer is considered dead, NetDefendOS will not try to re-negotiate the
tunnel or send DPD messages to the peer. However, the peer will not be considered dead any more
as soon as a packet from it is received.
A more detailed explanation for this setting is that it is the amount of time in tens of seconds that an
SA will remain in the dead cache after a delete. An SA is put in the dead cache when the other side
of the tunnel has not responded to DPD-R-U-THERE messages for DPD Expire Time x 10 seconds
and there is no other evidence of life. When the SA is placed in the dead cache, NetDefendOS will
not try to re-negotiate the tunnel. If traffic that is associated with the SA that is in the dead cache is
received, the SA will be removed from the dead cache. DPD will not trigger if the SA is already
cached as dead.
This setting is used with IKEv1 only.
Default: 2 (in other words, 2 x 10 = 20 seconds)
DPD Expire Time
The length of time in seconds for which DPD messages will be sent to the peer. If the peer has not
responded to messages during this time it is considered to be dead.
In other words, the length of time in seconds for which DPD-R-U-THERE messages will be sent. If
the other side of the tunnel has not sent a response to any messages then it is considered to be dead
(not reachable). The SA will then be placed in the dead cache.
This setting is used with IKEv1 only.
Default: 15 seconds
9.4.6. IPsec Advanced Settings
Chapter 9. VPN
362
Содержание 800 - DFL 800 - Security Appliance
