D-Link 800 - DFL 800 - Security Appliance, Руководство пользователя

Страница: 200 / 469

Entries made in the white and blacklists can make use of wildcarding to have a single entry be
equivalent to a large number of possible URLs. The wildcard character "*" can be used to represent
any sequence of characters.
For example, the entry *.some_domain.com will block all pages whose URLs end with
some_domain.com.
If we want to now explicitly allow one particular page then this can be done with an entry in the
whitelist of the form my_page.my_company.com and the blacklist will not prevent this page from
being reachable since the whitelist has precedence.
Deploying an HTTP ALG
As mentioned in the introduction, the HTTP ALG object is brought into use by first associating it
with a Service object and then associating that Service object with an IP rule in the IP rule set. A
number of pre-defined HTTP Services could be used with the ALG. For example, the http service
might be selected for this purpose. As long as the associated Service is associated with an IP rule
then the ALG will be applied to traffic targeted by that IP rule.
The https Service (which is also included in the http-all Service) cannot be used with an HTTP
ALG since HTTPS traffic is encrypted.
6.2.3. The FTP ALG
File Transfer Protocol (FTP) is a TCP/IP-based protocol for exchanging files between a client and a
server. The client initiates the connection by connecting to the FTP server. Normally the client
needs to authenticate itself by providing a predefined login and password. After granting access, the
server will provide the client with a file/directory listing from which it can download/upload files
(depending on access rights). The FTP ALG is used to manage FTP connections through the D-Link
Firewall.
FTP Connections
FTP uses two communication channels, one for control commands and one for the actual files being
transferred. When an FTP session is opened, the FTP client establishes a TCP connection (the
control channel) to port 21 (by default) on the FTP server. What happens after this point depends on
the FTP mode being used.
Connection Modes
FTP operates in two modes: active and passive. These determine the role of the server when opening
data channels between client and server.
In active mode, the FTP client sends a command to the FTP server indicating what IP address and
port the server should connect to. The FTP server establishes the data channel back to the FTP client
using the received address information.
In passive mode, the data channel is opened by the FTP client to the FTP server, just like the
command channel. This is the often recommended default mode for FTP clients though some advice
may recommend the opposite.
FTP Security Issues
Both active and passive modes of FTP operation present problems for D-Link Firewalls. Consider a
scenario where an FTP client on the internal network connects through the firewall to an FTP server
on the Internet. The IP rule is then configured to allow network traffic from the FTP client to port 21
on the FTP server.
6.2.3. The FTP ALG Chapter 6. Security Mechanisms
200