Introduction
FM4 S6E2H-Series Starter Kit Guide, Doc. No. 002-11387 Rev. **
9
1.4 Getting Started
This guide will help you get started with the FM4 S6E2H-Series Starter Kit:
The
Installation and Test Operation
chapter describes the kit installation and test
operation. This includes the CMSIS-DAP driver to enable the CMSIS-DAP debugger,
Serial Port Viewer Tool to view the serial port communication, Flash MCU programmer
and Flash USB Direct programmer to program the hex files on the device.
chapter describes the major features of the FM4 S6E2H-Series Starter
Kit and functionalities such as CMSIS-DAP debugger, RGB LED, and buttons.
chapter describes the available software resources and
tools, and how to create a project based on the Peripheral Driver Library (PDL).
provides the kit schematics, and the bill of materials (BOM).
1.5 Additional Learning Resources
Cypress provides a wealth of data at
to help you to select the right MCU
device for your design, and quickly and effectively integrate the device into your design. The
following is an abbreviated list for FM4 family resources:
Overview
: S6E2H-Series fact sheet
Device Selector
: Microcontroller Select Guide
Datasheets
: S6E2H-Series datasheet and Handling precautions.
FM4 Peripheral Manual
: Main Section, Communication Macro Section, Analog Macro
Section, Timer Section.
The documents listed above can be accessed from the kit’s webpage at
www.cypress.com/FM4-120L-S6E2HG
1.6 Technical Support
For assistance, visit Cypress Support or contact customer support at +1(800) 541-4736 Ext. 2
(in the USA) or +1(408) 943-2600 Ext. 2 (International).
