FM4 S6E2H-Series Starter Kit Guide, Doc. No. 002-11387 Rev. **
28
4. Software Development
This chapter provides information about the available software resources supporting the
S6E2HG device and FM4 S6E2H-Series Starter kit.
4.1 Tool Options
The FM4 S6E2H-Series is supported by several third party tools/IDEs, and the user can choose
their preferred tool for development. Any one of below listed IDEs can used for opening and
building the example projects packaged with this kit:
IAR Embedded Workbench for ARM
Keil ARM RealView® Microcontroller Development System
Download evaluation version
s of these tools from the vendor’s website. A full license may be
required to build or debug some of the example projects. For detailed information on using the
tools, see the documentation in the Help section of the tool chain or the website of the tool
’s
supplier.
4.1.1 Build an Example Project with IAR IDE
The following steps describe how to open, build, and run an example project in the IAR IDE.
The
s6e2hg_adc
is one example project that is available after a successful installation.
1. Launch IAR Embedded Workbench IDE V7.40.5.9739 (or later).
