Hardware
FM4 S6E2H-Series Starter Kit Guide, Doc. No. 002-11387 Rev. **
26
3.3.5 JTAG
The FM4 S6E2H-Series Starter Kit provides an interface, CN2, to connect an external
programmer for programming the FM4 S6E2HG MCU or for connecting a third-party debugging
tool. CN2 is a standard ARM 0.1
’’ 10*2-pin Cortex debug connector.
Figure 3-5: 10-pin JTAG I/F
3.3.6 Potentiometer
The FM4 S6E2H-Series Starter Kit has a potentiometer with resistance value ranging from 0 to
10 k
Ω. The middle terminal is connected to the ADC channel AN18.
Figure 3-6: Potentiometer
JTAG
Potentiometer
