Software Development
FM4 S6E2H-Series Starter Kit Guide, Doc. No. 002-11387 Rev. **
32
3. Click the
Build
icon to build this project.
4. Make sure the jumpers on the FM4 S6E2HG-Series Starter board are placed according to
Table 4-2: Debugging Jumper Settings
Jumper
Position
Description
J2
Open
Sets MB9AF312K to 3.3V.
J3
Open
Sets MB9AF312K (CMSIS-DAP) in run mode. Power from
CMSIS-DAP (CN2)
J7
Closed
Sets S6E2HG in run mode.
J10
Closed
Sets S6E2HG user module
J15
Pin1 to Pin2
Sets S6E2HG to 3.3V.
J19
Closed
CMSIS-DAP virtual COM connection
J20
Pin1 to Pin2
CMSIS-DAP virtual COM connection
J21
Pin2 to Pin3
PE0 drives blue LED
5. Connect the USB cable to the CN3 port.
6. Observe that Power LED (LED5) is glowing green.
7. Click the
Debug
icon, use shortcut
Crtl+F5,
or choose
Debug
>
Start/Stop Debug
Session
to start downloading and debugging.
8. Click
Run
to run the program once it is downloaded successfully.
9. Click
Stop
to stop the program when you want.
For more information about the Keil µVision IDE, please click
Help
from within the tool.