Software Development
FM4 S6E2H-Series Starter Kit Guide, Doc. No. 002-11387 Rev. **
39
2. Open the project file
in IAR Embedded Workbench from the following directory on your
PC:
IAR project: <User_Directory>:
\FM4 S6E2H-Series Starter Kit_Ver01\Firmware
\Demo Projects\s6e2hg_flash\IAR\s6e2hg_flash.eww.
3. Build the project and download the code into the S6E2HG device.
4. Open the memory window from the
View
>
Memory
. Enter 0x00070000 in the
Go to
table
and press the
Enter
Key on your PC.
5. Run the program for a while (>10 seconds).
6. Stop the program and check the content of 0x00070000 in flash.
4.2.3.3.2 Instructions for Keil µVision IDE
1. Power the FM4 S6E2H-Series Starter board from CN3 using a USB cable, refer to
2. Open the project
s6e2hg_flash
in Keil µVision IDE from the following directory on your PC:
Keil project: <User_Directory>:
\FM4 S6E2H-Series Starter Kit_Ver01\Firmware
\Demo Projects\s6e2hg_flash\ARM\s6e2hg_flash.uvprojx.
3. Build the project and download the code into the S6E2HG device.
