CY8CKIT-040 PSoC
®
4000 Pioneer Kit Guide, Doc. # 001-91316 Rev. *F
117
Advanced Topics
7. In the command window, copy and paste the code from the
F-RAM_BCP_Commands.txt
file
attached to this document.
8. By default the F-RAM device is configured with a 0x50 slave address. If the value has been
, then change the slave address in the
command window (replace “50” with the slave address in hex format).
9. Do a write to the F-RAM device by sending the 'W 50 00 00 01 02' line, which writes to memory
location 0x0000 with the value 0x01 and memory location 0x0001 with 0x02. The command sent
should be ACKed properly by the slave to make sure the transfer occurred properly, as shown in
.
Figure 6-19. Send/Write Data to F-RAM
Содержание CY8CKIT-040 PSoC 4000 Pioneer Kit
Страница 20: ...CY8CKIT 040 PSoC 4000 Pioneer Kit Guide Doc 001 91316 Rev F 20 Kit Operation...
Страница 37: ...CY8CKIT 040 PSoC 4000 Pioneer Kit Guide Doc 001 91316 Rev F 37 Hardware...
Страница 73: ...CY8CKIT 040 PSoC 4000 Pioneer Kit Guide Doc 001 91316 Rev F 73 Code Examples Raw count and Baseline...
