CY8CKIT-040 PSoC
®
4000 Pioneer Kit Guide, Doc. # 001-91316 Rev. *F
25
Kit Operation
3.4
USB-I
2
C Bridge
The PSoC 5LP also functions as a USB-I
2
C bridge. The PSoC 4 communicates with the PSoC 5LP
using an I
2
C interface, and the PSoC 5LP transfers the data over the USB to the USB-I
2
C software
utility on the PC called the Bridge Control Panel (BCP).
The BCP is available as part of the PSoC Programmer installation. This software can be used to
send and receive USB-I
2
C data from the PSoC 5LP. When the USB Mini-B cable is connected to
header J10 on the PSoC 4000 Pioneer Kit, the
KitProg USB-I
2
C
is available under
Connected I2C/
SPI/RX8 Ports
in the BCP, as shown in
.
Figure 3-10. Bridge Control Panel
Содержание CY8CKIT-040 PSoC 4000 Pioneer Kit
Страница 20: ...CY8CKIT 040 PSoC 4000 Pioneer Kit Guide Doc 001 91316 Rev F 20 Kit Operation...
Страница 37: ...CY8CKIT 040 PSoC 4000 Pioneer Kit Guide Doc 001 91316 Rev F 37 Hardware...
Страница 73: ...CY8CKIT 040 PSoC 4000 Pioneer Kit Guide Doc 001 91316 Rev F 73 Code Examples Raw count and Baseline...
