Cypress CY8CKIT-040 PSoC 4000 Pioneer Kit, Руководство пользователя

Страница: 70 / 181

CY8CKIT-040 PSoC
®
4000 Pioneer Kit Guide, Doc. # 001-91316 Rev. *F 70
Code Examples
6. Choose Chart > Variable Settings and set the variable names and types, as shown in
Figure 5-23 . Or click Load and then select the CapSense Proximity UART - Variable.ini file sup-
plied with the project (
...\Firmware\PSoC 4\Bridge Files\
) in the Open window that
appears. Click OK to exit.
Figure 5-23. Bridge Control Panel - Variable Settings
7. Choose File > Open File and select the CapSense Proximity UART - Editor.iic file supplied with
the project from the
...\Firmware\PSoC 4\Bridge Files\
folder (as shown in
Figure 5-24 ). Alternatively, go to Editor and type or copy the following command:
rx8 [h=0D 0A] @1RawCount @0RawCount @1Baseline @0Baseline @1Signal @0Signal @1Duty @0Duty [t=00 ff ff]
Figure 5-24. Open *.iic File in Bridge Control Panel
OR